2.54mm Dual-in-line Socket Straight DIP (H=3.0) connector Specifications: Current Rating: 1.0Amp Contact Resistance: 10MΩ  max Dielectric Strength: Min 1000 V RMS Mechanical Life:Min 100 cycles Operating Temperature: -40°C  to  +105°C Sleeve:  Brass  CuZn36Pb3(C36000) Contact Clip(4 finger): BeCu(C17200) Contact Plating:  Au or Sn Over Ni Insulator Material:  PPS+30%GF UL 94V-0 06p~16P  Insulators without center bar 36p~52P  Insulators with center two bar 64P  Insulators with center three  bar

Similar

Automotive Connector 27P External Thread Assembly
3.96mm Card EDGE Slot Solder Type Connectors
Coin Cell Holders For CR2032 DIP 90°Type 3PINS
Coin Cell Holders Right Angle DIP For 2032
OBD 16P Male Angle Reverse 24V Type 14.6MM
Cell Battery Contacts For CR159A
DIN41612 Vertical Female 32P IDC Connectors 3Row
128 Positions Vertical Female DIN41612 Connector
1.27mm Micro Match IDC Box Header
Machined PGA Pin Grid Array Sockets 2.54x1.27mm
DIN41612 Right Plug Power Connectors 48 Positions
MICRO USB 2.0 B Type Receptacle

ShenZhen Antenk Electronics Co,Ltd

Antenk Electronics Co., LTD., founded in 2007, located in Shenzhen, Guangdong, is one of the most…

Download

Download Current

Copyrights © 2024 alederlight.com All Rights.Reserved .