Aluminum Die Casting Walking Motor Housing

Aluminum Die Casting Walking Motor Housing, the material for this part is ADC-12, a kind of material, having good fluidity, which is good for filling while die casting. This material is a good material to produce end cover, housing, gearbox, bracket etc. The composition of ADC-12 is:(Cu)1.5~3.5, (Si)9.6~12.0, (Mg)≤0.3, (Zn)≤1.0, (Fe)≤1.3, (Mn)≤0.5, (Ni)≤0.5, (Sn)≤0.3, (Pb) ≤0.1, (Cd) ≤0.005, (Al) the remaining. The cavity number for this part is 2, according to the required tolerance and dimensions in terms of the prints, the part has difficulty on CNC machining, the wall thickness is small, not much machining allowance left. The part is a kind of motor housing, the bore is used to assemble the bearing, so the concentricity requirement is higher than the other parts. Meanwhile, as the housing for bearings, the part has definite mechanical property requirement.  Die Casting is a technology that, press the melting aluminum under high pressure, high speed, usu…

Transmission Parts Motor Home Parts Motor End Cover CNC Milling Automobile Chassis Parts