Test procedure
Instructions
must be read entirely before taking the test. Allow the test device
controls to equilibrate to room temperature for 30 minutes (20℃-30℃)
prior to testing. Do not open the inner packaging until ready, it must
be used in one hour if opened (Humidity: 20%~90%, Temp: 10℃-50℃)
1. Take off the outer packing, put the cassette onto the desk with the
sample window up.
2. Apply 3 full drops of serum or plasma (80μl-100μl) vertically into
the sample hole of cassette. Avoid air bubble in the pipette, a bubble
may prevent the complete transfer of sample and invalidate the test. Use
a new pipette for each test performed, even if using the same sample.
3. Observe the test results immediately within 15~30 minutes, the result
is invalid over 35 minutes.…