160P Right Angle Solder Type E Plug DIN41612 DIN 41612 / IEC 60603-2 Connectors

Product introduction The positioning accuracy can ensure that the connector is accurately connected when the circuit board is loaded into the chassis; the installation firmness is used to ensure that the connector does not fall off or shift when the circuit board is pulled out and inserted; the replaceability is used when the same chassis is connected to the upper part. When the device needs to be disassembled or replaced, it can be operated conveniently and quickly. Din41612 mainly have parallel connection and vertical connection. The connection form is: straight hole - curved needle, vertical connection of curved hole - straight needle, parallel connection of curved hole - curved needle. The number of contact points are: 20, 30, 32, 40, 64, 96, 120, 128, 160, etc.  DIN41612 Right Angle Penta Row Plug Type E Solder 160P Specification Current Rating:  2.0Amp Insulation Resistance:   1000MΩ min.at DC 100V Contac…

0.4mm Narrow (Fine) Pitch Board to Board Connectors Dip Plug Connector 2.54mm Pitch IC SOCKET Others