Shrouded Box Header Introduction Box Header is usually called:  which is usually composed of square plastic socket and several square pins arranged in order. The difference between the simple ox connector and the ox horn connector is that the simple ox horn connector removes the buckles on both sides. Classification of Box Header: Box Header are divided in o 1.27mm pitch Box Header, 2.0mm pitch Box Header and 2.54mm pitch Box Header according to PIN needle gauge. The diameter of the square row needles used will be changed accordingly according to the different pitch.According to the installation form, it can be divided in o straight needle Box Header, curved needle Box Header and SMT patch Box Header. Function of Box Header: Box Header is welded on PCB board, connect IDC cable of corresponding specifications, and then form the circuit connection mode required by the designer with other circuits. Usually used to transmit control signals an…

Similar

0.4mm Board to Board Connector Male Mating-Height 1.0mm
1.5mm Mating-High 0.4mm Female Board to Board Connector
0.8mm pitch Wire to Board Insulation Displacement Connector
1.27x2.54mm IDC flat cable DIP plug connector Four Row Foot
1.27mm IDC Flat Cable Header DIP plug Connector(terminated height 7.0)
1.27mm IDC flat cable headers section DIP plug connector (Terminated Height 5.1)
2.54mm Dual-in-line Integrated Circuit (IC) Sockets Connector Straight DIP(H=3 L=7.4)
2.54mm Dual-in-Line IC Socket Connector SMT (H=3.0 L=4.2)
1.27mm SCSI Connector 20P Receptacle Headers Right-Angle Mount Ribbon
35Pin Electric Control Center /ECU Automotive Connector
160P Right Angle Solder Type E Plug DIN41612 DIN 41612 / IEC 60603-2 Connectors
128 Pin Vertical Male Type C Eurocard DIN41612 Connectors

HuiZhou Antenk Electronics Co., LTD

  Our History   HuiZhou Antenk Electronics Co., LTD(with the trade mark of "ANTENK") was e…

Download

Download Current

Website

Copyrights © 2025 alederlight.com All Rights.Reserved .