--up to 1300l/min --aluminum 1.Technical Specification 1.1 Filter Housing Construction SDTF filter consists of a filter head with built-in bypass valve and lower filter housing with a check valve. 1.2 Filter Element Filter elements are available with the following pressure stability values: W: 5bar Test standard ISO2942 ISO16889 ISO3968 ISO3724 ISO3723 ISO2943 ISO2941   2. General Installation On the top, at the side or in the bottom of oil tank. Temperature range -10°C~+100°C Pressure setting of clogging indicator ΔP=0.18bar-10% Pressure setting of bypass valve ΔPo=0.2bar+10%(standard)   3. Model Code   4. Advantages High contamination retention capacity High pressure stability values Good flow fatigue strength Low initial differential pressure Low cost with high quality   5. Application SDTF filters have been all widely used in petrochemical, coal chemical, sewage treatment, nuclear power, agr…

Similar

High Pressure Oil Inline Filter
Duplex lube oil pressure filter assembly
Duplex Inline Filter for Hydraulic Systems
Duplex Inline Oil Filter
Change-Over Inline Oil Filter
Hydac Replacement NF Inline Oil Filter
Return Line Oil Filter
Aluminum Low Pressure Filter
Block-Mounted High Pressure Filter
Glass Fiber Filter Element
Hydraulic Lubrication Oil Filter Element
inline oil filter with differential pressure relief valve

Xinxiang Shengda Filtration Technique Co., Ltd.

Xinxiang Shengda Filtration Technique Co., Ltd, is engaged in designing and manufacturing filtration…

Download

Download Current

Copyrights © 2025 alederlight.com All Rights.Reserved .